Resource
Coating system options for EPS foam forms, signage, displays and custom fabricated pieces.
Resource
Coating systems help match EPS moulds and profiles to the strength, finish and number of uses required by the project.
The staging source compares plywood, polyurethane and fiberglass-based systems across finish quality, time, durability, drawbacks and cost.
Comparison Table
Class 2 finish
Plywood with resin finish laminated onto foam. Strong and familiar, with good time and durability, but limited to straight edges.
Joint support
Similar to L100 with PU glue-bonded joints. Useful for angled plane-to-plane joints, though sanding and sizing need care.
Sprayed coating
Sprayed polyurethane coating with sanding. Practical for industrial use where finish is less critical and strength is required.
Higher finish
A more prepared polyurethane coating path with additional coats, sanding and final quality control for a better finish.
Premium system
A stronger proprietary fiberglass and epoxy-based option that requires more preparation and finishing time.
More Products
Lightweight EPS blocks used for civil works, infill, ground stabilisation and load reduction.
Rigid EPS sheets and boards for thermal performance, wall cladding and building insulation.
Custom foam blocks and profiles for construction voids, formwork, concrete shaping and project-specific infills.
